banner
Home » Products »

Low-value Simple Injection Mold

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2019-01-29 19:43

  • Browse the number:

    134

Send an inquiries
Company Profile
KongFamilytech(foshan) Co.,Ltd
By certification [File Integrity]
Contact:

hsdm001(Mr.)  

Email:

Telephone:

Phone:

Area:

Guangdong

Address:

Xinyuan 2nd Road, Jili Industrial Park, Chancheng, Foshan City, Guangdong,China

Website: http://www.kftmold.com/ http://www.akmpropertycare.com/com/hsdm001/
Product details

Items

Description

Mould type

Low value simple injection mold

Service life

1000 PCS

Mold size(mm)

250*350

Number of Cavities

1*2

Runner Type

Cold Runner

Tool Steel

S45C

Mold Base Type

S45C

Surface finish

Glossy

Part Material

PP

Applied range

industrial products

Customized


 

Product Details 

PP open mold injection molding process should pay attention to the problem (including the requirements of injection molding machine) in order to reduce internal stress and surface quality defects, PP open mold injection processing should pay attention to the following aspects.

 

Should use special screw, abs open injection molding with separate temperature control nozzle.

The injection temperature should be higher than the plastic resin without decomposition.

 

PP open mold injection processing injection pressure: Generally higher, to overcome the drawback of high viscosity of the melt, but too high pressure will cause internal stress and cause deformation and deformation

 

Injection speed: In the case of filling the mold, it is generally preferred to use a slow, fast and slow multi-stage injection;

 

Holding time and molding cycle: In the case of satisfying the filling of the product without generating depressions or bubbles; Should be as short as possible to minimize the residence time of the melt in the barrel

 

Screw speed and back pressure: Under the premise of satisfying the quality of plasticization, it should be as low as possible to prevent the possibility of depreciation.

 

PP open mold injection molding mold temperature: The cooling of the product is very good and has a great influence on the quality. Therefore, the mold temperature must be able to accurately control the process. If possible, the mold temperature should be higher.






http://www.kftmold.com/

New Products